Dexter Inspired retro Iron On Patch Sew on transfer badge - Dexter's Laboratory

Picture of actual item

 Approximate size 50mm x 90mm

Instructions

As a guideline only please check both the material and Iron instructions 

1. Set the iron to a hot cotton setting. usually between 120-140°C
2. Place the patch in the desired location and cover with a thin piece of cloth.
3. Iron and apply firm pressure evenly on the patch for approx 30-40sec till the glue melts.
4. Iron the opposite side for approx 20-30sec to reinforce.
5. When washing turn your garment inside out and use a gentle wash cycle.